How to smoke hash + weed with 2 bottle?

Smoking hash and weed using two bottles can be done in a few different ways, but one popular method is to create a simple water pipe (bong) setup. Here’s a basic guide on how to do it using two plastic bottles: ### Materials Needed: - Two plastic bottles (you can use empty soda bottles) - Scissors or a sharp knife - A bowl piece (can be made from aluminum foil or sourced from a store) - Water - Hash and weed - A lighter ### Instructions: 1. **Preparation of Bottles:** - **First Bottle (Water Bottle):** This will be your main water chamber. - Remove the cap and fill the bottle with water about 1/3 to 1/2 full. - **Second Bottle (Top Bottle):** This will act as the upper chamber. - Remove the bottom of this bottle to create an open cylinder. 2. **Creating the Bowl:** - If you don't have a bowl piece, you can fashion one from aluminum foil. - Make a small bowl shape with aluminum foil, ensuring it has holes at the bottom for airflow. 3. **Assembly:** - **Cut the first bottle:** Use the scissors to make a small hole in the side of the first bottle, about 2-3 inches from the bottom. This will be the downstem hole. - **Insert the bowl piece:** If you have a bowl piece, insert it into the hole you just made, angling it downward into the water. - If using aluminum foil, place the foil bowl in the hole. - **Connect the second bottle:** Invert the second bottle into the first bottle. You may need to adjust the size of the hole to ensure a snug fit. - Make sure the top of the second bottle is above the first bottle and that there is a sealed connection between the two bottles. 4. **Packing the Bowl:** - Mix your hash and weed together (if desired) and pack it into the bowl. 5. **Smoking:** - Put your mouth on the mouthpiece of the top bottle. - Light the bowl while inhaling gently. The smoke will travel down into the water and then up into the second bottle, where you can inhale it. 6. **Enjoy Responsibly:** - Take small hits to gauge your tolerance, and always remember to smoke responsibly. ### Notes: - **Safety First:** Be mindful of the materials you use, especially with DIY tools. Avoid using harmful substances and ensure there are no harmful residues in your materials. - **Legal Considerations:** Be aware of the laws regarding hash and cannabis in your area, as they can vary greatly. ### Cleanup: - After you’re done, ensure that you clean your setup properly, especially if you’re using two bottles with an improvised design. Enjoy your smoke!